1kg.cm 2kg.cm Nema 14 35mm hybrid Stepper Motor for 3D printer JK35HS42
1) Product Description and images
As the stepping motor is a device that converts electrical pulses into discrete mechanical motion and has good data control characteristics, the computer has become the ideal driving source of the stepping motor.
With the development of microelectronics and computer technology, the control mode of combining software and hardware has become the mainstream, that is, the control pulse is generated by the program to drive the hardware circuit.
The single-chip microcomputer controls the stepping motor through software, which better exploits the potential of the motor. Therefore, it has become an inevitable trend to control the stepping motor with single-chip microcomputer, and it is also in line with the trend of the digital era.
2) Product DataSheet
| Genaral Specification: |
| Item | Specifications |
| Step Angle | 1.8° |
| Temperature Rise | 80℃max |
| Ambient Temperature | -20℃~+50℃ |
| Insulation Resistance | 100 MΩ Min. ,500VDC |
| Dielectric Strength: | 500VAC for 1minute |
| Shaft Radial Play | 0.02Max. (450g-load) |
| Shaft Axial Play | 0.08Max. (450g-load) |
| Max. radial force | 28N (20mm from the flange) |
| Max. axial force | 10N |
| Electrical Specifications: |
| Model No. | Step Angle | Motor Length | Current
/Phase | Resistance
/Phase | Inductance
/Phase | Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Weight |
| ( °) | (L)mm | A | Ω | mH | g.cm | No. | g.cm | g.cm2 | Kg |
| JK35HS28-0504 | 1.8 | 28 | 0.5 | 20 | 14 | 1000 | 4 | 80 | 11 | 0.13 |
| JK35HS34-1004 | 1.8 | 34 | 1 | 2.7 | 4.3 | 1400 | 4 | 100 | 13 | 0.17 |
| JK35HS42-1004 | 1.8 | 42 | 1 | 3.8 | 3.5 | 2000 | 4 | 125 | 23 | 0.22 |
| Above only for representative products, products of special request can be made according to the customer request. |
3) Product Drawing
4) Other Products
| Stepper Motor Series |
| Motor series | Phase No. | Step angle | Motor size | Motor length | Holding torque |
| Nema 8 | 2 phase | 1.8 degree | 20x20mm | 30~42mm | 180~300g.cm |
| Nema 11 | 2 phase | 1.8 degree | 28x28mm | 32~51mm | 430~1200g.cm |
| Nema 14 | 2 phase | 1.8 degree | 35x35mm | 27~42mm | 1000~2000g.cm |
| Nema 16 | 2 phase | 1.8 degree | 39x39mm | 20~44mm | 650~2800g.cm |
| Nema 17 | 2 phase | 1.8 degree | 42x42mm | 25~60mm | 1.5~7.3kg.cm |
| Nema 23 | 2 phase | 1.8 degree | 57x57mm | 41~112mm | 0.39~3.1N.m |
| Nema 24 | 2 phase | 1.8 degree | 60x60mm | 56~111mm | 1.17~4.5N.m |
| Nema 34 | 2 phase | 1.8 degree | 86x86mm | 67~155mm | 3.4~12.2N.m |
| Nema 42 | 2 phase | 1.8 degree | 110x110mm | 99~201mm | 11.2~28N.m |
| Nema 52 | 2 phase | 1.8 degree | 130x130mm | 173~285mm | 13.3~22.5N.m |
We supply Stepper motor, Brushless DC motor, DC Brushed motor, Driver, Spindle motor,
AC servo motor, Coreless motor, Gearbox reducer, Power supply, ball screw, linear guide, and parts.
5) Product information and advantages
Determine how much torque is required: static torque is one of the main parameters for selecting stepping motor. When the load is large, large torque motor shall be used. When the torque index is large, the motor shape is also large.
Judge the motor running speed: when the speed requirement is high, the motor with large phase current and small inductance should be selected to increase the power input. And a higher supply voltage is used when selecting the driver.
Select the installation specifications of the motor, such as 42, 57, 86, 110, etc., which are mainly related to the torque requirements.
Product Tags:
|
|
1kg.Cm 2kg.Cm Nema 14 35mm Hybrid Stepper Motor For 3D Printer JK35HS42 Images
|
